When a roof requires slope correction toward drainage outlets, leveling of uneven areas, or a relatively lightweight filling layer compared with some conventional solutions, Foam Concrete can be incorporated into the roof system according to the project design.

Foam Concrete is a lightweight cementitious material with a cellular structure. It can be used for slope formation, leveling, filling, and contributing to the thermal performance of a roof assembly depending on its density, thickness, and mix design.

However, there is an important distinction that should be understood before installation: Foam Concrete is not sprayed polyurethane foam, and we do not rely on it alone as a waterproof membrane against rainwater. Its function and position within the roof system are determined according to the project requirements and the layers that will be installed afterward.

We provide Foam Concrete services for roofs in Saudi Arabia backed by more than 11 years of experience in insulation and roofing systems. Our work begins with a site inspection, level measurements, drainage-point assessment, and determination of the required thicknesses, followed by mix preparation, pumping, slope formation, and final inspection.

What Is Foam Concrete?

Foam Concrete is a lightweight cementitious material containing air cells or voids distributed throughout the mixture.

This cellular structure is created using a Foaming Agent to produce stable foam, which is then incorporated into the cementitious mix according to a specific design to achieve the properties required for the project.

Depending on the selected system, the mixture may contain cement, water, foaming agent, the resulting air, sand or other fine materials, and additives when they form part of the approved mix design.

For this reason, there is no single mixing ratio suitable for every Foam Concrete project. The composition varies according to the required density, strength, function, and project specifications.

When Does a Roof Need Foam Concrete?

Foam Concrete is used when there is a specific functional requirement within the roof system, rather than simply to add another layer.

It may be used for:

  • Creating slopes toward rainwater drainage outlets.
  • Correcting differences in roof levels.
  • Leveling specific areas before subsequent layers are installed.
  • Raising roof levels according to the project design.
  • Providing a relatively lightweight filling layer.
  • Reducing load compared with certain higher-density filling or concrete solutions, subject to the project design.
  • Rehabilitating an existing roof.
  • Preparing a new roof for subsequent insulation and protection systems.
  • Adding a layer that contributes to the thermal performance of the roof assembly.

The suitability of Foam Concrete is determined after assessing the required function of the layer, slab condition, loads, thicknesses, and the remaining components of the roof system.

Request a Foam Concrete Inspection Before Calculating Quantity and Cost

If your project roof requires slopes toward drainage outlets, correction of level differences, or a Foam Concrete layer as part of the roof system, do not rely on roof area alone to calculate the required quantity or cost.

  • Contact us

Frequently Asked Questions About Foam Concrete

What Is the Difference Between Foam Concrete and Conventional Concrete?

Foam Concrete used in these applications has a lower density than conventional concrete and contains a cellular air structure. It is used for purposes such as slope formation, leveling, and filling according to the project design. It is not presented as a direct replacement for structural concrete elements.

Does Foam Concrete Prevent Rainwater Leakage?

We do not rely on Foam Concrete alone as a membrane for preventing water penetration. When a roof requires protection against leakage, a separate waterproofing system compatible with the roof build-up is selected.

Is Foam Concrete a Thermal Insulator?

It has thermal properties that depend on density, thickness, and mix design and can contribute to the thermal performance of a roof system. However, it is not an automatic replacement for a specialized thermal insulation system.

What Is the Appropriate Density for Foam Concrete?

There is no single density suitable for every application. Density is selected according to the function of the layer, required strength, thickness, loads, and project requirements.